Diamond water mill is suitable for all the ground containing cement products, such as cement ground,Silicon carbide, terrazzo ground, but not suitable for granite, marble, artificial stone laying of all kinds of ground, step processing and renovation. Here is to introduce the operation method of diamond water mill.
First, the operation method of diamond water mill.
Diamond water mill is suitable for hand-held electric or pneumatic ground washing mill with power of 750-1500W and revolutions of 2000-10000. When working, the machine can apply a fixed pressure on the surface of the stone to be ground for 4-5 times, and then the finer grinding pieces can be replaced.
Diamond WATER MILL IS SUITABLE FOR ALL THE GROUND CONTAINING CEMENT PRODUCTS, such as cement ground,Silicon carbide, terrazzo,ground, but not suitable for granite, marble, artificial stone laying of all kinds of ground, step processing and renovation.
Diamond water mill is suitable for hand-held electric or pneumatic ground washing mill with power of 750-1500W and revolutions of 2000-10000. When working, the machine can apply a fixed pressure on the surface of the stone to be ground for 4-5 times, and then the finer grinding pieces can be replaced.
When diamond water grinding tablets are used, two numbers should be used for each grade. Through the grinding of these two numbers, the grinding marks left by the previous grade can be removed. This is also something that is easy to be ignored in the renovation and grinding of stone.
General water mill is often used for Angle mill and ground refurbishment machine, mainly for all kinds of granite, marble and artificial stone polishing and grinding, of course, also more suitable for the ground stone refurbishment, but the process of grinding need to add the right amount of water for cooling.
Two, the operation of diamond water mill.
1. more often used to polish granite, concrete hair floor and marble and other types of special-shaped stone inner arc, corner and outer arc;
2. the sharpness of diamond water grinding is relatively good, and the grinding speed is also very fast, not only high luminosity and fast glazing;
3. the degree of wear resistance is very high, and the use of life is much longer, is a comprehensive performance and cost-effective are relatively high;
4. If you use a hand-held watermill and polishing machine, remember that the whole speed of the motor can not be less than 4500 RPM;
5. the application of different colors of stone, in the selection of soft grinding piece must choose the color and stone close to each other;
6. When we use soft grinding pieces, the right way is to stick the surface with velvet directly on the joint, which is not only convenient but also very fast.
The above is the introduction of the operation method of diamond water mill, I hope to help you. We have many years of experience in the production of Tianli grinding tablets, if necessary, please call us.
Post time: Dec-15-2022
